system-view                         进入配置模式

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname center_switch            更改交换机名

创建vlan

[center_switch]vlan 40                           

[center_switch-vlan40]quit

给vlan配置IP地址           

[center_switch]interface Vlanif 40       

[center_switch-Vlanif40]ip address 10.10.40.1 255.255.255.0

将某个端口加入到vlan中

[center_switch] interface port GigabitEthernet 0/0/24

[center_switch-GigabitEthernet0/0/24]port link-type access

[center_switch-GigabitEthernet0/0/24]port default vlan40

将交换机中一组端口加入到一个VLAN中

创建vlan

[center_switch]vlan 42

[center_switch-vlan42]quit

给vlan 配置IP地址

[center_switch]interface Vlanif 42

[center_switch-Vlanif42]ip add

[center_switch-Vlanif42]ip address 10.10.42.1 255.255.255.0

创建端口组

[center_switch]port-group port1to8forvlan40

将相应的端口加入组中

[center_switch]port-group port1to8forvlan40]group-member GigabitEthernet 0/0/1 to GigabitEthernet 0/0/8

设置端口方式

[center_switch-port-group-port1to8forvlan42]port link-type access

设置端口组默认vlan(即之前创建好的vlan ID 42)

[center_switch-port-group-port1to8forvlan42]port default vlan 42

[center_switch]display vlan

save

[Quidway] display version

显示VRP版本号 

[Quidway] display current-configuration

显示系统运行配置信息

[Quidway] display saved-configuration

显示保存的配置信息

[Quidway] display interfaces brief

显示接口配置信息

[Quidway]display ip routing-table

显示路由表 

[Quidway]display systname 

命令用来显示路由器的名称

以上就是华为S5700交换机配置VLAN的方法，谢谢阅读，希望能帮到大家，请继续关注，我们会努力分享更多优秀的文章。